Audi A6 C6 2.0 TDI Manual Gearbox Flywheel Dual Twin Mass 240MM Set 03G105266BH

Audi A6 C6 2.0 TDI Manual Gearbox Flywheel Dual Twin Mass 240MM Set is an original drivetrain component from the Flywheels and gears category, designed for use with a manual transmission. The set has been engineered for a specific engine and gearbox configuration, ensuring proper torsional vibration damping and stable drivetrain operation under typical operating conditions.

Specifications and technical data

• SKU: 03G105266BH-1
• Mark: Audi
• Condition: Used
• OEM Part Number: 03G105266BH
• Substitutable numbers: 03G105266BH, 03G 105 266 BH
• Gearbox type: Manual
• Category: Flywheels & Flexplates

Purpose and function in the drivetrain

The presented dual-mass flywheel set is dedicated to the 2.0 TDI diesel unit in the Audi A6 C6 generation model with a manual gearbox. Its task is to reduce vibrations generated by the engine and isolate them from the transmission, which translates into smoother drivetrain operation, reduced stress on gearbox components, and improved gear shifting comfort.

The 240 mm working diameter allows for the use of a properly selected clutch, ensuring the correct friction surface and stable torque transmission. As a result, the system is optimized for the characteristics of the 2.0 TDI engine, both in the low and medium RPM ranges.

Benefits of using an original dual-mass flywheel

Using the original set in the Audi A6 C6 2.0 TDI provides a number of practical technical benefits:

• preservation of factory drivetrain characteristics and engine refinement,
• better torsional vibration damping compared to simple single-mass solutions,
• reduction of noise and knocking coming from the transmission at low RPM,
• reduced load on synchronizers and gearbox gears,
• more predictable vehicle behavior when starting and shifting gears.

For the user, this means a smoother ride, stable torque transmission, and a reduction in the risk of secondary damage within the gearbox.

Technical characteristics and compatibility

The dual-mass flywheel in this set is structurally adapted to work with a manual gearbox, which is crucial for the proper operation of the system. The dual-mass design allows for the separation of the primary and secondary mass, between which a system of springs and dampers operates, responsible for compensating for crankshaft rotation irregularities.

Properly selected spring and damping parameters ensure:

• stable load transmission at typical torque levels of the 2.0 TDI engine,
• reduction of jerking during sudden acceleration or deceleration,
• limitation of resonances in the RPM range most commonly used in city and highway driving.

This makes the set the right choice when replacing a worn dual-mass flywheel in Audi A6 C6 units with a manual transmission, maintaining parameters close to factory specifications.

Condition, origin, and practical application

The offered item is a used part, sourced from dismantling, which allows for economical repair while maintaining the manufacturer's original specifications. For many users, this represents a reasonable compromise between costs and maintaining the correct drivetrain performance. When replacing, it is worth simultaneously verifying the condition of the clutch, release bearing, and mounting hardware to avoid the need for re-dismantling in the near future.

If you are planning a more extensive modernization or repair of the drivetrain in your Audi, it is worth checking out other items from the Flywheels and gears group to select a complete and consistent service solution.

Installation and maintenance tips

To fully utilize the potential of this set, installation in a specialized workshop is recommended, in accordance with the vehicle manufacturer's procedures. It is crucial to:

• use new mounting bolts in accordance with technical recommendations,
• thoroughly clean the contact surfaces with the crankshaft and clutch disc,
• check for play and any leaks in the vicinity of the gearbox,
• properly bleed the clutch system after installation is complete.

Following these rules helps reduce the risk of improper system operation and extends the period of trouble-free use. Additional information on the rational selection of parts from dismantling can be found in the article on the use of used body elements and other parts from dismantling, which discusses the practical aspects of using original second-hand components.

Why choose this set for the Audi A6 C6 2.0 TDI

Audi A6 C6 2.0 TDI Manual Gearbox Flywheel Dual Twin Mass 240MM Set is a solution intended for users who want to restore the proper operation of the drivetrain while maintaining factory design assumptions. Its original origin, fitment for a specific engine and gearbox configuration, and the possibility of economical repair make it a sensible choice for vehicle maintenance. Additionally, by maintaining specific damping characteristics, the set helps keep ride comfort and drivetrain refinement at a level consistent with the manufacturer's specifications.

If you are also interested in other issues related to the operation and repair of premium brand vehicles, it is worth visiting our advice section, including the entry on the selection and installation of used car parts, which helps in consciously planning service and modernization work.